Author: ellyk

  • Coronavirus disease 2019

    COVID-19 is a contagious disease caused by the coronavirus SARS-CoV-2. In January 2020, the disease spread worldwide, resulting in the COVID-19 pandemic.

    The symptoms of COVID‑19 can vary but often include fever,[7] fatigue, cough, breathing difficulties, loss of smell, and loss of taste.[8][9][10] Symptoms may begin one to fourteen days after exposure to the virus. At least a third of people who are infected do not develop noticeable symptoms.[11][12] Of those who develop symptoms noticeable enough to be classified as patients, most (81%) develop mild to moderate symptoms (up to mild pneumonia), while 14% develop severe symptoms (dyspnea, hypoxia, or more than 50% lung involvement on imaging), and 5% develop critical symptoms (respiratory failure, shock, or multiorgan dysfunction).[13] Older people have a higher risk of developing severe symptoms. Some complications result in death. Some people continue to experience a range of effects (long COVID) for months or years after infection, and damage to organs has been observed.[14] Multi-year studies on the long-term effects are ongoing.[15]

    COVID‑19 transmission occurs when infectious particles are breathed in or come into contact with the eyes, nose, or mouth. The risk is highest when people are in close proximity, but small airborne particles containing the virus can remain suspended in the air and travel over longer distances, particularly indoors. Transmission can also occur when people touch their eyes, nose, or mouth after touching surfaces or objects that have been contaminated by the virus. People remain contagious for up to 20 days and can spread the virus even if they do not develop symptoms.[16]

    Testing methods for COVID-19 to detect the virus’s nucleic acid include real-time reverse transcription polymerase chain reaction (RT‑PCR),[17][18] transcription-mediated amplification,[17][18][19] and reverse transcription loop-mediated isothermal amplification (RT‑LAMP)[17][18] from a nasopharyngeal swab.[20]

    Several COVID-19 vaccines have been approved and distributed in various countries, many of which have initiated mass vaccination campaigns. Other preventive measures include physical or social distancing, quarantining, ventilation of indoor spaces, use of face masks or coverings in public, covering coughs and sneezes, hand washing, and keeping unwashed hands away from the face. While drugs have been developed to inhibit the virus, the primary treatment is still symptomatic, managing the disease through supportive care, isolation, and experimental measures.

  • Coronavirus disease 2019

    COVID-19 is a contagious disease caused by the coronavirus SARS-CoV-2. In January 2020, the disease spread worldwide, resulting in the COVID-19 pandemic.

    The symptoms of COVID‑19 can vary but often include fever,[7] fatigue, cough, breathing difficulties, loss of smell, and loss of taste.[8][9][10] Symptoms may begin one to fourteen days after exposure to the virus. At least a third of people who are infected do not develop noticeable symptoms.[11][12] Of those who develop symptoms noticeable enough to be classified as patients, most (81%) develop mild to moderate symptoms (up to mild pneumonia), while 14% develop severe symptoms (dyspnea, hypoxia, or more than 50% lung involvement on imaging), and 5% develop critical symptoms (respiratory failure, shock, or multiorgan dysfunction).[13] Older people have a higher risk of developing severe symptoms. Some complications result in death. Some people continue to experience a range of effects (long COVID) for months or years after infection, and damage to organs has been observed.[14] Multi-year studies on the long-term effects are ongoing.[15]

    COVID‑19 transmission occurs when infectious particles are breathed in or come into contact with the eyes, nose, or mouth. The risk is highest when people are in close proximity, but small airborne particles containing the virus can remain suspended in the air and travel over longer distances, particularly indoors. Transmission can also occur when people touch their eyes, nose, or mouth after touching surfaces or objects that have been contaminated by the virus. People remain contagious for up to 20 days and can spread the virus even if they do not develop symptoms.[16]

    Testing methods for COVID-19 to detect the virus’s nucleic acid include real-time reverse transcription polymerase chain reaction (RT‑PCR),[17][18] transcription-mediated amplification,[17][18][19] and reverse transcription loop-mediated isothermal amplification (RT‑LAMP)[17][18] from a nasopharyngeal swab.[20]

    Several COVID-19 vaccines have been approved and distributed in various countries, many of which have initiated mass vaccination campaigns. Other preventive measures include physical or social distancing, quarantining, ventilation of indoor spaces, use of face masks or coverings in public, covering coughs and sneezes, hand washing, and keeping unwashed hands away from the face. While drugs have been developed to inhibit the virus, the primary treatment is still symptomatic, managing the disease through supportive care, isolation, and experimental measures.

  • Hello world!

    Welcome to WordPress. This is your first post. Edit or delete it, then start writing!

  • A Commitment to Reduce Carbon Emissions

    When you service all makes of turbine, all around the world, how do you make sure that safety standards are maintained at the highest level? It’s an important question – and when we talk to our customers about what’s most important to them competencies in renewable energy systems. IRecco’s extensive range of robust and reliable products backed by its cutting-edge R&D and more than two decades of expertise are designed to ensure optimum performance. Of course, it’s a given that all turbines live up to strict legislation, but that’s not really where the greatest safety challenge lies. If you look at the causes of incidents, more than 90% are caused by human behavior. That’s why we believe that keeping the highest safety record means creating a safety-first mindset.

    The people I meet who service our turbines are special: They’re proud of what they do, and they take their jobs very seriously. It’s not an easy environment to work in. When you’ve experienced standing on the top of an 80m high turbine, swaying in the wind like a ship at sea, you really respect what they do. It takes a cool head and a lot of courage.

    Why it Might Be Time to Visit Wind Farm Self-Performance

    But not all the people who are attracted to this lifestyle – because that’s what it is – are not natural-born rule followers. And to secure a high safety level for all, we spend a lot of time developing watertight safety procedures and protocols which must become second nature for them. Because not following rules has serious consequences. Secondly, training is vital, both technical safety training, turbine specific training as well as Safety awareness training. Adding to this leadership needs to be strong and leaders perform safety walks to check first-hand what our engineers will encounter. Even our executive leadership takes part, and our CEO has climbed the ladder and walked the roof of a nacelle… so when they talk safety they can speak from experience.

    “ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

    Our goal is to create the same service documentation for each and every turbine, in a standardized, user-friendly format. Our engineers already have enough to think about without having to navigate convoluted directions! With this global service manual, we’re able to give the same training round the world to make sure all our technicians stay safe. Performance and target-wise we don’t distinguish between brands and expect the same safety performance when servicing all makes of turbines. Because safety comes first. It’s that simple.

  • Helping Companies in  Their Green Transition

    Helping Companies in Their Green Transition

    When you service all makes of turbine, all around the world, how do you make sure that safety standards are maintained at the highest level? It’s an important question – and when we talk to our customers about what’s most important to them competencies in renewable energy systems. IRecco’s extensive range of robust and reliable products backed by its cutting-edge R&D and more than two decades of expertise are designed to ensure optimum performance. Of course, it’s a given that all turbines live up to strict legislation, but that’s not really where the greatest safety challenge lies. If you look at the causes of incidents, more than 90% are caused by human behavior. That’s why we believe that keeping the highest safety record means creating a safety-first mindset.

    The people I meet who service our turbines are special: They’re proud of what they do, and they take their jobs very seriously. It’s not an easy environment to work in. When you’ve experienced standing on the top of an 80m high turbine, swaying in the wind like a ship at sea, you really respect what they do. It takes a cool head and a lot of courage.

    Why it Might Be Time to Visit Wind Farm Self-Performance

    But not all the people who are attracted to this lifestyle – because that’s what it is – are not natural-born rule followers. And to secure a high safety level for all, we spend a lot of time developing watertight safety procedures and protocols which must become second nature for them. Because not following rules has serious consequences. Secondly, training is vital, both technical safety training, turbine specific training as well as Safety awareness training. Adding to this leadership needs to be strong and leaders perform safety walks to check first-hand what our engineers will encounter. Even our executive leadership takes part, and our CEO has climbed the ladder and walked the roof of a nacelle… so when they talk safety they can speak from experience.

    “ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

    Our goal is to create the same service documentation for each and every turbine, in a standardized, user-friendly format. Our engineers already have enough to think about without having to navigate convoluted directions! With this global service manual, we’re able to give the same training round the world to make sure all our technicians stay safe. Performance and target-wise we don’t distinguish between brands and expect the same safety performance when servicing all makes of turbines. Because safety comes first. It’s that simple.

  • From Niche to 100 GW  Mainstream and Beyond

    From Niche to 100 GW Mainstream and Beyond

    When you service all makes of turbine, all around the world, how do you make sure that safety standards are maintained at the highest level? It’s an important question – and when we talk to our customers about what’s most important to them competencies in renewable energy systems. IRecco’s extensive range of robust and reliable products backed by its cutting-edge R&D and more than two decades of expertise are designed to ensure optimum performance. Of course, it’s a given that all turbines live up to strict legislation, but that’s not really where the greatest safety challenge lies. If you look at the causes of incidents, more than 90% are caused by human behavior. That’s why we believe that keeping the highest safety record means creating a safety-first mindset.

    The people I meet who service our turbines are special: They’re proud of what they do, and they take their jobs very seriously. It’s not an easy environment to work in. When you’ve experienced standing on the top of an 80m high turbine, swaying in the wind like a ship at sea, you really respect what they do. It takes a cool head and a lot of courage.

    Why it Might Be Time to Visit Wind Farm Self-Performance

    But not all the people who are attracted to this lifestyle – because that’s what it is – are not natural-born rule followers. And to secure a high safety level for all, we spend a lot of time developing watertight safety procedures and protocols which must become second nature for them. Because not following rules has serious consequences. Secondly, training is vital, both technical safety training, turbine specific training as well as Safety awareness training. Adding to this leadership needs to be strong and leaders perform safety walks to check first-hand what our engineers will encounter. Even our executive leadership takes part, and our CEO has climbed the ladder and walked the roof of a nacelle… so when they talk safety they can speak from experience.

    “ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

    Our goal is to create the same service documentation for each and every turbine, in a standardized, user-friendly format. Our engineers already have enough to think about without having to navigate convoluted directions! With this global service manual, we’re able to give the same training round the world to make sure all our technicians stay safe. Performance and target-wise we don’t distinguish between brands and expect the same safety performance when servicing all makes of turbines. Because safety comes first. It’s that simple.

  • Adding Business Value Through Certification

    When you service all makes of turbine, all around the world, how do you make sure that safety standards are maintained at the highest level? It’s an important question – and when we talk to our customers about what’s most important to them competencies in renewable energy systems. IRecco’s extensive range of robust and reliable products backed by its cutting-edge R&D and more than two decades of expertise are designed to ensure optimum performance. Of course, it’s a given that all turbines live up to strict legislation, but that’s not really where the greatest safety challenge lies. If you look at the causes of incidents, more than 90% are caused by human behavior. That’s why we believe that keeping the highest safety record means creating a safety-first mindset.

    The people I meet who service our turbines are special: They’re proud of what they do, and they take their jobs very seriously. It’s not an easy environment to work in. When you’ve experienced standing on the top of an 80m high turbine, swaying in the wind like a ship at sea, you really respect what they do. It takes a cool head and a lot of courage.

    Why it Might Be Time to Visit Wind Farm Self-Performance

    But not all the people who are attracted to this lifestyle – because that’s what it is – are not natural-born rule followers. And to secure a high safety level for all, we spend a lot of time developing watertight safety procedures and protocols which must become second nature for them. Because not following rules has serious consequences. Secondly, training is vital, both technical safety training, turbine specific training as well as Safety awareness training. Adding to this leadership needs to be strong and leaders perform safety walks to check first-hand what our engineers will encounter. Even our executive leadership takes part, and our CEO has climbed the ladder and walked the roof of a nacelle… so when they talk safety they can speak from experience.

    “ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

    Our goal is to create the same service documentation for each and every turbine, in a standardized, user-friendly format. Our engineers already have enough to think about without having to navigate convoluted directions! With this global service manual, we’re able to give the same training round the world to make sure all our technicians stay safe. Performance and target-wise we don’t distinguish between brands and expect the same safety performance when servicing all makes of turbines. Because safety comes first. It’s that simple.

  • Brand Service Demands  a Special Mindset

    Brand Service Demands a Special Mindset

    When you service all makes of turbine, all around the world, how do you make sure that safety standards are maintained at the highest level? It’s an important question – and when we talk to our customers about what’s most important to them competencies in renewable energy systems. IRecco’s extensive range of robust and reliable products backed by its cutting-edge R&D and more than two decades of expertise are designed to ensure optimum performance. Of course, it’s a given that all turbines live up to strict legislation, but that’s not really where the greatest safety challenge lies. If you look at the causes of incidents, more than 90% are caused by human behavior. That’s why we believe that keeping the highest safety record means creating a safety-first mindset.

    The people I meet who service our turbines are special: They’re proud of what they do, and they take their jobs very seriously. It’s not an easy environment to work in. When you’ve experienced standing on the top of an 80m high turbine, swaying in the wind like a ship at sea, you really respect what they do. It takes a cool head and a lot of courage.

    Why it Might Be Time to Visit Wind Farm Self-Performance

    But not all the people who are attracted to this lifestyle – because that’s what it is – are not natural-born rule followers. And to secure a high safety level for all, we spend a lot of time developing watertight safety procedures and protocols which must become second nature for them. Because not following rules has serious consequences. Secondly, training is vital, both technical safety training, turbine specific training as well as Safety awareness training. Adding to this leadership needs to be strong and leaders perform safety walks to check first-hand what our engineers will encounter. Even our executive leadership takes part, and our CEO has climbed the ladder and walked the roof of a nacelle… so when they talk safety they can speak from experience.

    “ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

    Our goal is to create the same service documentation for each and every turbine, in a standardized, user-friendly format. Our engineers already have enough to think about without having to navigate convoluted directions! With this global service manual, we’re able to give the same training round the world to make sure all our technicians stay safe. Performance and target-wise we don’t distinguish between brands and expect the same safety performance when servicing all makes of turbines. Because safety comes first. It’s that simple.

  • Adding Business Value Through Certification

    When you service all makes of turbine, all around the world, how do you make sure that safety standards are maintained at the highest level? It’s an important question – and when we talk to our customers about what’s most important to them competencies in renewable energy systems. IRecco’s extensive range of robust and reliable products backed by its cutting-edge R&D and more than two decades of expertise are designed to ensure optimum performance. Of course, it’s a given that all turbines live up to strict legislation, but that’s not really where the greatest safety challenge lies. If you look at the causes of incidents, more than 90% are caused by human behavior. That’s why we believe that keeping the highest safety record means creating a safety-first mindset.

    The people I meet who service our turbines are special: They’re proud of what they do, and they take their jobs very seriously. It’s not an easy environment to work in. When you’ve experienced standing on the top of an 80m high turbine, swaying in the wind like a ship at sea, you really respect what they do. It takes a cool head and a lot of courage.

    Why it Might Be Time to Visit Wind Farm Self-Performance

    But not all the people who are attracted to this lifestyle – because that’s what it is – are not natural-born rule followers. And to secure a high safety level for all, we spend a lot of time developing watertight safety procedures and protocols which must become second nature for them. Because not following rules has serious consequences. Secondly, training is vital, both technical safety training, turbine specific training as well as Safety awareness training. Adding to this leadership needs to be strong and leaders perform safety walks to check first-hand what our engineers will encounter. Even our executive leadership takes part, and our CEO has climbed the ladder and walked the roof of a nacelle… so when they talk safety they can speak from experience.

    “ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

    Our goal is to create the same service documentation for each and every turbine, in a standardized, user-friendly format. Our engineers already have enough to think about without having to navigate convoluted directions! With this global service manual, we’re able to give the same training round the world to make sure all our technicians stay safe. Performance and target-wise we don’t distinguish between brands and expect the same safety performance when servicing all makes of turbines. Because safety comes first. It’s that simple.

  • Adding Business Value Through Certification

    When you service all makes of turbine, all around the world, how do you make sure that safety standards are maintained at the highest level? It’s an important question – and when we talk to our customers about what’s most important to them competencies in renewable energy systems. IRecco’s extensive range of robust and reliable products backed by its cutting-edge R&D and more than two decades of expertise are designed to ensure optimum performance. Of course, it’s a given that all turbines live up to strict legislation, but that’s not really where the greatest safety challenge lies. If you look at the causes of incidents, more than 90% are caused by human behavior. That’s why we believe that keeping the highest safety record means creating a safety-first mindset.

    The people I meet who service our turbines are special: They’re proud of what they do, and they take their jobs very seriously. It’s not an easy environment to work in. When you’ve experienced standing on the top of an 80m high turbine, swaying in the wind like a ship at sea, you really respect what they do. It takes a cool head and a lot of courage.

    Why it Might Be Time to Visit Wind Farm Self-Performance

    But not all the people who are attracted to this lifestyle – because that’s what it is – are not natural-born rule followers. And to secure a high safety level for all, we spend a lot of time developing watertight safety procedures and protocols which must become second nature for them. Because not following rules has serious consequences. Secondly, training is vital, both technical safety training, turbine specific training as well as Safety awareness training. Adding to this leadership needs to be strong and leaders perform safety walks to check first-hand what our engineers will encounter. Even our executive leadership takes part, and our CEO has climbed the ladder and walked the roof of a nacelle… so when they talk safety they can speak from experience.

    “ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

    Our goal is to create the same service documentation for each and every turbine, in a standardized, user-friendly format. Our engineers already have enough to think about without having to navigate convoluted directions! With this global service manual, we’re able to give the same training round the world to make sure all our technicians stay safe. Performance and target-wise we don’t distinguish between brands and expect the same safety performance when servicing all makes of turbines. Because safety comes first. It’s that simple.